Pc Stuff and Gizmo Sca

The processor:

Remember when I mentioned the motherboards Bus speed and how important it is when choosing a processor, let me explain:
Before I do, let me explain what your processor is .A computer without a processor is a pile of electrical equipment, plastic, and metal with no purposes, and with no processor, your computer will not compute.
It is literally the brains of your computer, it handles a every single action and process that made in your system, now I’m talking millions per second.
Therefore, it makes sense to say if you have a fast processor then, most definitely your PC is going to run a lot faster.

Now going back to your bus speeds. Just imagine for a second that your processor is a big factory, and in that factory it fixes teddy bears, this is not for real I have yet to see a factory that fixes teddy bears. Keep this in your head, on one side of the factory you have repaired teddy bears leaving with a smile on there face ,and on the other side you have damaged teddy bears entering the factory looking bit cheesed off.

The path that the teddies are using to enter and exit the factory is you bus.
If you update the factory, (the processor) then the process of repair is faster than the data entering and leaving the factory, in other words no mater how fast your processor is, it will always process its information at the speed its designed to do ,but the distribution of data across the bored will be governed by its bus speed. Therefore, when you bye new processor always get the faster bus speed available, by doing this you are maximizing the true potential of you CPU and motherboard.

Make sure when you bye the processor that it matches the socket on your board. To install CPU locate the indicator pin on the chip and the corresponding mark on the socket in the board .there will be a lever handle by the CPU socket you must pull this up ,insert the chip into the socket and push the handle back down into position. Next apply the CPUs heat sink and fan on to the CPU and connect the fans power cable to the board.(DO NOT SWITH ON THE MACHINE WITH OUT THE CPU HEAT SINK AND FAN).